7
8. Plug the Wireless Sync Dongle into an available USB port and click Next. You
may remove the USB Charging cable if it’s occupying the only available USB
port.
9. Use the on-screen instructions as a guide to slide your Flex into the wristband
you’ve chosen. Once your Flex is appropriately inserted into the wristband,
click Next.
10. Put your Flex wristband on, making sure to align the lights with the outside of
your wrist. Once your wristband is securely on your wrist, click Next.
11. Fitbit Connect will now search for your Flex. Once found, the lights on your
Flex will begin to blink. Tap your Flex repeatedly with your finger until it
vibrates. If you have trouble finding your Flex, click I don’t see lights blinking
and follow the on-screen instructions for further help.
12. Once Fitbit Connect shows the message Linking Complete, you can click Next
to continue.
NOTE: If you continue to experience trouble setting up your Flex, you can get
support for this and other questions at http://help.fitbit.com.
13. You can now go to your Fitbit.com Dashboard and start tracking or configure
your account settings by clicking Go to Dashboard.
Wireless sync to a computer
Fitbit Connect must be installed and your Wireless Sync Dongle inserted for your
tracker to sync with Fitbit.com.
Syncing occurs automatically when your Flex is within 20-30 feet of a plugged-in
Wireless Sync Dongle. You can force sync your Flex by clicking on the Fitbit Connect
icon, which is located by the time and date on your computer. Select Sync Now to
start the force sync.
NOTE: If you experience any trouble syncing your tracker with your computer, you
can visit http://help.fitbit.com for further help.
To Next Page
Loading...
Need help?
General
