EasyManuals Logo
Home>FLIR>Thermographic Cameras>A3 series

FLIR A3 series User Manual

FLIR A3 series
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Technical data13
Storage of images
Storage media Built-in memory for image storage
File formats Standard JPEG, 16-bit measurement data
included
Ethernet
Ethernet Control and image
Ethernet, type 100 Mbps
Ethernet, standard IEEE 802.3
Ethernet, connector type RJ-45
Ethernet, communication TCP/IP socket-based FLIR proprietary
Ethernet, video streaming MPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5
Ethernet, image streaming 16-bit 320 × 240 pixels @ 3 Hz
Radiometric
Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0.
NOTE: In cameras manufactured before 2013,
due to an error in the implementation of power
over Ethernet, in some rare cases the camera will
not be powered. In such cases, power the camera
using the external power cable, or modify the
camera according to Service bulletin SB14-006.
For modification, please contact your local service
department. See http://support.flir.com/service for
contact details.
Ethernet, protocols TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP,
ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour),
uPnP
Digital input/output
Digital input, purpose Image tag (start/stop/general), Input ext. device
(programmatically read)
Digital input 2 opto-isolated, 10–30 VDC
Digital output, purpose Output to ext. device (programmatically set)
Digital output
2 opto-isolated, 10–30 VDC, max 100 mA
Digital I/O, isolation voltage 500 VRMS
Digital I/O, supply voltage 12/24 VDC, max 200 mA
Digital I/O, connector type 6-pole jackable screw terminal
Composite video
Video out Composite video output, PAL and NTSC
compatible
Video, standard CVBS (ITU-R-BT.470 PAL/SMPTE 170M NTSC)
Video, connector type Standard BNC connector
Power system
External power operation 12/24 VDC, 24 W absolute max
External power, connector type 2-pole jackable screw terminal
Voltage
Allowed range 10–30 VDC
Environmental data
Operating temperature range –15°C to +50°C (+5°F to +122°F)
Storage temperature range –40°C to +70°C (–40°F to +158°F)
Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C
to +40°C (+77°F to +104°F)
#T559498; r.22370/22370; en-US
31

Table of Contents

Other manuals for FLIR A3 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FLIR A3 series and is the answer not in the manual?

FLIR A3 series Specifications

General IconGeneral
BrandFLIR
ModelA3 series
CategoryThermographic Cameras
LanguageEnglish

Related product manuals