Technical data13
13.8 FLIR A315
P/N: 48001-1101
Rev.: 22369
General description
The FLIR A315 has features and functions that make it the natural choice for anyone who uses PC soft-
ware to solve problems and for whom 320 × 240 pixel resolution is sufficient. Among its main features
are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software
packages such as IMAQ Vision and Halcon.
Key features:
• Affordable.
• GigE compliant.
• GenICam compliant.
• Trigg/synchronization/GPIO.
• 16-bit 320 × 240 pixel images at 60 Hz, signal, temperature linear, and radiometric.
• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision
and Stemmers Common Vision Blox.
• Lenses: 25° included, 15° and 45° optional.
Typical applications:
• High-end infrared machine vision that requires temperature measurement.
• Slag detection.
• Food processing.
• Electronics testing.
• Power resistor testing.
• Automotive.
Imaging and optical data
IR resolution 320 × 240 pixels
Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK
Field of view (FOV)
25° × 18.8°
Minimum focus distance 0.4 m (1.31 ft.)
Focal length 18 mm (0.7 in.)
Spatial resolution (IFOV)
1.36 mrad
Lens identification Automatic
F-number 1.3
Image frequency 60 Hz
Focus Automatic or manual (built in motor)
Detector data
Detector type Focal Plane Array (FPA), uncooled
microbolometer
Spectral range
7.5–13 µm
Detector pitch 25 µm
Detector time constant Typical 12 ms
Measurement
Object temperature range
• –20 to +120°C (–4 to +248°F)
• 0 to +350°C (+32 to +662°F)
Accuracy
±2°C (±3.6°F) or ±2% of reading
Measurement analysis
Atmospheric transmission correction Automatic, based on inputs for distance, atmos-
pheric temperature and relative humidity
Optics transmission correction Automatic, based on signals from internal sensors
Emissivity correction Variable from 0.01 to 1.0
#T559498; r.22370/22370; en-US
45
To Next Page
Loading...
Need help?
General
