Technical data13
13.4 FLIR A300 (9 Hz)
P/N: 42701-1001
Rev.: 22369
General description
The FLIR A300 (9 Hz) provides an affordable and accurate temperature measurement solution for any-
one who needs to solve problems that do not call for the highest speed or reaction and who uses a PC.
Due to its composite video output, it is also an excellent choice for thermal image automation applica-
tions, where you can utilize its unique properties such as looking through steam.
Key features:
• MPEG-4 streaming.
• PoE (Power over Ethernet).
• Built-in web server.
• General purpose I/O.
• 100 Mbps Ethernet (100 m cable, wireless, fiber, etc.).
• Synchronization through SNTP.
• Composite video output.
• Multi-camera utility software: FLIR IP Config and FLIR IR Monitor included.
• Open and well-described TCP/IP protocol for control and set-up.
• 16-bit 320 × 240 pixel images at 3 Hz, radiometric.
• Lenses: 25° included, 15° and 45° optional.
Typical applications:
• Fire prevention, critical vessel monitoring, and power utility asset management.
• Volume-oriented industrial control (multi-camera installation is possible).
Imaging and optical data
IR resolution 320 × 240 pixels
Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK
Field of view (FOV)
25° × 18.8°
Minimum focus distance 0.4 m (1.31 ft.)
Focal length 18 mm (0.7 in.)
Spatial resolution (IFOV)
1.36 mrad
Lens identification Automatic
F-number 1.3
Image frequency 9 Hz
Focus Automatic or manual (built in motor)
Zoom 1–8× continuous, digital, interpolating zooming on
images
Detector data
Detector type Focal Plane Array (FPA), uncooled
microbolometer
Spectral range
7.5–13 µm
Detector pitch 25 µm
Detector time constant Typical 12 ms
Measurement
Object temperature range
• –20 to +120°C (–4 to +248°F)
• 0 to +350°C (+32 to +662°F)
Accuracy ±2°C (±3.6°F) or ±2% of reading
Set-up
Color palettes Color palettes (BW, BW inv, Iron, Rain)
Set-up commands Date/time, Temperature°C/°F
#T559498; r.22370/22370; en-US
30
To Next Page
Loading...
Need help?
General
