Quick start guide
7
Follow this procedure to get started right away:
1. Charge the battery for 4 hours before starting the camera for the first time, or until the
blue battery condition LED glows continuously.
2. Push the on/off button to turn on the camera.
3. Aim the camera toward the object of interest.
4. Select a suitable camera mode by pushing the Mode button.
5. Pull the trigger to save an image.
6. Connect the camera to a computer, using the USB cable.
7. Do one of the following:
• Move the image to the computer using a drag-and-drop operation in Microsoft
Windows Explorer.
Note Moving an image using a drag-and-drop operation does not delete the im-
age in the camera.
• Move the image to the computer using FLIR Tools. In FLIR Tools you can analyze
the images and create PDF reports.
Note The function of the trigger is configured by a setting in FLIR Tools, see section
12.14.2 The User interface tab, page 43.
#T559946; r. BA/41926/41970; en-US
15
To Next Page
Loading...
Need help?
General
