FLIR K 5 Series User Manual

Operation
12
12.7 Recording a video clip (FLIR K55 and FLIR
K65)
12.7.1 General
You can record video clips and save them to the camera’s archive.
12.7.2 Figure
12.7.3 Procedure
Note The function of the trigger is configured by a setting in FLIR Tools, see section
12.14.2 The User interface tab, page 43.
Follow this procedure:
1. Aim the camera toward an object of interest.
2. Depending on the Trigger button setting in FLIR Tools, do one of the following to start
the recording:
• With the Rec. on/off setting, pull the trigger.
• With the Record video setting, pull and hold the trigger.
3. A blinking circle in the middle left part of the screen indicates that the camera is cur-
rently recording a video clip.
4. Depending on the Trigger button setting in FLIR Tools, do one of the following to stop
the recording:
• With the Rec. on/off setting, pull the trigger.
• With the Record video setting, release the trigger.
#T559946; r. BA/41926/41970; en-US
33

FLIR K 5 Series Specifications

General

Brand	FLIR
Model	K 5 Series
Category	Thermal cameras
Language	English