KEYLESS ENTRY SYSTEM (IF EQUIPPED)
You can use the keyless entry
keypad to:
• lock or unlock the doors without using a key.
• activate or deactivate the autolock feature.
• open and close the right and left power sliding doors (if equipped).
• recall memory seat/side view mirrors/adjustable pedals position Driver
1 or Driver 2 (if equipped).
The keypad can be operated with the factory set 5–digit entry code; this
code is located:
• on the owner’s wallet card in the glove box,
• marked on the passenger compartment fuse panel (located below and
to the left of the steering, near the brake pedal),
• and is available from your
authorized dealer.
You can also create your own 5–digit
personal entry code.
When pressing the controls on the
keypad, press the middle of the
controls to ensure a good activation.
Programming a personal entry code
To create your own personal entry code(s):
1. Enter the factory set code. Note: The driver’s door will unlock.
2. Within five seconds press and release the 1 • 2 on the keypad. Note:
The lock motors will cycle, locked then unlocked.
3. Enter your personal 5-digit code. Each number must be entered
within five seconds of each other.
2006 Freestar (win)
Owners Guide (post-2002-fmt)
USA (fus)
Locks and Security
104
To Next Page
Loading...
Need help?
General
