27
General: Thermostat Configuration
Conguring the Equipment Settings
Enter the equipment code by changing the digits on the screen. Refer to the table
below.
• Press the FAN button to advance to the next equipment setting.
• Press the UP and DOWN buttons to increase or decrease the value;
• Press the F|C button to advance to the next menu.
The table below explains each digit of the equipment settings:
NOTE:
Digit
Value
Digit #1
Compressor Type
Digit #2
Electric Heat
Digit #3
Reversing Valve
Digit #4
# of Fan Speeds
0 No Compressor No Electric Heat
O/B Contact is energized
to cool
N/A
1 Heat Pump Has electric Heat
O/B Contact is energized
to heat
1
2 Air Conditioner* N/A N/A 2
IMPORTANT: INSERTING THE WRONG EQUIPMENT CODE MAY CAUSE THE
HVAC UNIT NOT OPERATING AS EXPECTED.
Digit #3 Reversing Valve makes a difference ONLY when a Compressor Type
(Digit#1) is set to Heat Pump (digit value 1).
Please refer to the next page for all equipment codes.
To Next Page
Loading...
Need help?
General
