Fuji Xerox docucentre-iv C2270 User Manual

Broadcast
241
Fax
4
Broadcast
This section describes how to set Broadcast Send and Relay Broadcast.
Broadcast Send (Transmitting to Multiple Recipients)............................................................ 241
Relay Broadcast (Transmitting Documents Through a Relay Station).................................... 242
Remote Relay Broadcast (Performing Relay Broadcast to Remote Locations)....................... 245
Broadcast Send (Transmitting to Multiple Recipients)
The Broadcast Send feature allows you to transmit the same document to multiple
recipients in a single operation. There is no need to repeat the same operation for each
recipient.
When the Additional G3 Port 2 (optional) is installed, you can use the extra lines to
make multiple transmissions simultaneously with Broadcast Send.
If you specify Broadcast Send, the machine prints a Broadcast/Multi-Poll Report after
the Broadcast Send operation finishes.
Note • You can use Broadcast Send by specifying recipients from Fax, Internet Fax, and IP Fax
(SIP), for a single job. (Mix Broadcast)
• The maximum number of recipients that you can specify at one time is as follows: Using the
numeric keypad: 200 locations; using address numbers: 600 locations; and using the
numeric keypad in combination with address numbers: 600 locations.
• The address numbers 0001 - 0070, or 0001 - 0060 correspond to the one touch buttons 1 -
70, or 1 - 60. For more information on the one touch buttons, refer to "Control Panel" (P.56).
• When using Broadcast Send, the Cover Page and Remote Folder features are not available
even if they are enabled on the control panel. If you want to use [Cover Page] and [Remote
Folder], set them when registering each recipient in an address number.
• [Confirmation Options] is not available. Check a Broadcast/Multi-Poll Report to see
transmission results.
1 Select the first recipient.
Note • When you specify recipients from Fax and
Internet Fax for a single job (Mix
Broadcast), select the fax type for each
recipient from the drop-down menu.
2 Select [+ Add].
3 Select the next recipient.
4 Repeat steps 2 and 3.
5 Press the <Start> button.
6 Select [Yes] on the confirmation screen to start transmission.

Fuji Xerox docucentre-iv C2270 Specifications

General

Brand	Fuji Xerox
Model	docucentre-iv C2270
Category	All in One Printer
Language	English