General Information
44
3
Power On/Off key 3
Power On/Off key has the following functions:
Power Off
Make sure that the machine is in the Ready mode, then hold down for about 2 seconds. All the LEDs
turn off when you enable the Power Off mode. For details about Power Off mode, see Auto Power Off
on page 47.
Cancel printing
Cancel the current job being printed: Press and hold for about 2 seconds. The machine will then eject
the paper. The Error LED ( ) and Ready LED ( ) will light up alternately. Then release .
Error recovery
If there is an error, the machine will recover automatically from some errors. If an error is not automatically
cleared, press to clear the error, and then continue to use the machine.
Form feed
If the Ready LED ( ) blinks for a long time, press . The machine will print any data that is left in the
machine’s memory.
To Next Page
Loading...
Need help?
General
