Troubleshooting and other information
61
A
If you are having difficulty with your machine A
• For technical help, you must call Fuji Xerox customer service or your local Fuji Xerox dealer.
• If you think there is a problem with your machine, check the chart below and follow the troubleshooting
tips. Most problems can be easily resolved by yourself.
Printing difficulties
Difficulties Suggestions
No printout. Check that the correct printer driver has been installed and chosen.
Check to see if the LEDs are indicating any error.
(See LEDs (Light Emitting Diodes) on page 38 and Error messages in the Status
Monitor on page 52.)
Check the machine is online:
(For Windows Server
®
2012 R2)
Click Control Panel on the Start screen. In the Hardware and Sound group, click
View devices and printers. Right-click FX DocuPrint P115 w. Click
Seewhat’sprinting. If printer driver options appear, select your printer driver. Click
Printer in the menu bar and make sure Use Printer Offline is not selected.
(For Windows
®
8 and Windows Server
®
2012)
Move your mouse to the lower right corner of your desktop. When the menu bar
appears, click Settings, and then click Control Panel. In the Hardware and Sound
group, click View devices and printers. Right-click FX DocuPrint P115 w and click
Seewhat’sprinting. Click Printer and make sure Use Printer Offline is
unchecked.
(Windows
®
7 and Windows Server
®
2008 R2)
Click the (Start) button and Devices and Printers. Right-click
FX DocuPrint P115 w and click Seewhat’sprinting. Click Printer and make sure
Use Printer Offline is unchecked.
(Windows Vista
®
and Windows Server
®
2008)
Click the (Start) button > Control Panel > Hardware and Sound > Printers.
Right-click FX DocuPrint P115 w. Make sure that Use Printer Online is deselected.
(Windows
®
XP and Windows Server
®
2003)
Click the Start > Printers and Faxes. Right-click FX DocuPrint P115 w. Make sure
that Use Printer Online is deselected.
The machine is not printing or
prints unexpectedly.
Press and hold for about 2 seconds until all the LEDs light up and then release
it.
The machine will cancel the print job and clear it from the memory. The printout may
be incomplete.