Troubleshooting and other information
64
A
Machine Information A
Default settings A
The machine has three levels of default settings; the default settings have been set at the factory before
shipment.
Network Reset
Factory Reset
Settings Reset
• You cannot modify the preset default settings.
• Page counters can never be changed.
Network Reset A
To reset only the print server back to its default settings (by resetting all network information such as the
password and IP address), follow these steps:
Turn the machine off.
Make sure that the top cover is closed and the power cord is plugged in.
While holding down , open and close the top cover once.
Release . Make sure that all the LEDs turn off.
Press six times. Make sure that all the LEDs light up to indicate the machine has been reset to its
network default settings. The machine will restart.
Factory Reset A
You can partially reset the machine back to its default printer settings:
Turn off the machine.
Make sure that the top cover is closed and the power cord is plugged in.
While holding down , open and close the top cover once.
Release . Make sure that all the LEDs turn off.
To Next Page
Loading...
Need help?
General
