Troubleshooting 104
Clearing Paper Jams From the Center Output Tray
IMPORTANT:
• To prevent electric shock, always turn off the printer and disconnect the power cord from the grounded outlet
before performing maintenance.
• To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes extremely hot
during use.
NOTE:
• To resolve the error displayed on the operator panel, you must clear all print media from the print media path.
1 Push the rear cover handle and open the rear cover.
2 Lift up the levers.
3 Remove any paper jammed from the back of the printer. If no paper is found in the paper path,
then remove any paper jammed out of the center output tray.
To Next Page
Loading...
Need help?
General
