69 Printing Basics
10 Open the output tray extension by two steps. At the secondary step, extend it fully until it clicks.
11 Select the paper type from the print driver if the loaded print media is not standard plain paper. If
a user-specified print media is loaded in the multipurpose feeder (MPF), you must specify the
paper size setting by using the print driver.
NOTE:
• For more information about setting the paper size and type on the print driver, refer to the
online Help provided for the print driver.
Loading Envelope in the Multipurpose Feeder (MPF)
NOTE:
• When you print on envelopes, be sure to specify the envelope setting on the print driver. If not specified, the
print image will be rotated 180 degrees.
To Next Page
Loading...
Need help?
General
