33 Basic Operation
Operator Panel
The operator panel has one button and two light-emitting diodes (LEDs) that show the status of the
printer.
1 (Error) LED
• Indicates an error occurred.
2 (Ready) LED
• Indicates the printer status such as ready to print.
3 Button
• Press this button to start duplex printing after loading paper.
• Press and hold this button during printing to cancel a print job.
• Press this button to exit the Power Saver mode.
• Press this button to continue a pending job in an error state such as misfeeding after checking
that paper is loaded properly.
The LEDs provide information on the status of the printer.
See also:
• "Understanding the Operator Panel Lights" on page 93
LED Status Condition
Error Umber on An error occurred.
Umber blinks A fatal error occurred.
Ready Green on The printer is ready to print.
Green blinks The printer is receiving, printing, or waiting for print data.
Green blinks slowly The printer is in the Power Saver mode.
1
2
3
To Next Page
Loading...
Need help?
General
