TX1320 M4 Upgrade and Maintenance Manual 29
2.3 Tools you need at hand
When preparing the maintenance task, ensure that all required tools are
available according to the overview below. You will find a list of required tools at
the beginning of each procedure.
2.4 Documentation overview
Maintenance procedures may include references to additional documentation.
When preparing the maintenance task, ensure that all required manuals are
available according to the overview below.
I – Ensure to store all printed manuals enclosed with your server in a
save place for future reference.
– Unless stated otherwise, all manuals are available online at
http://manuals.ts.fujitsu.com under x86 Servers.
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/man
ual/
Document Description
"Safety Notes and Regulations"
manual
" 安全上のご注意 " for Japan
Important safety information, available
online, or as a printed copy
"FUJITSU Server PRIMERGY
TX1320 M4 Operating Manual"
Information how to install, set up and
operate your server, available online
"FUJITSU Server PRIMERGY
TX1320 M4 Upgrade and
Maintenance Manual"
Instructions for upgrading the server
configuration or replacing defective
hardware, available online
"D3673 BIOS Setup Utility for
FUJITSU Server PRIMERGY
TX1320 M4 Reference Manual"
Information on configurable BIOS options
and parameters, available online
System foil Label inside the top cover outlining
connectors, indicators and jumper
Table 2: Documentation overview