EasyManuals Logo
Home>Fujitsu>Server>PRIMERGY TX1320 M4

Fujitsu PRIMERGY TX1320 M4 Upgrade And Maintenance Manual

Fujitsu PRIMERGY TX1320 M4
372 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
82 Upgrade and Maintenance Manual TX1320 M4
Basic software procedures
5.2.9 Enabling replaced components in the BIOS
When a CPU, an expansion card, or a memory module fails, the defective
component will be set to Disabled or Failed in the BIOS. The server will then
reboot with only the intact hardware components remaining in the system
configuration. After replacing the defective component, it needs to be re-
enabled in the BIOS.
Ê Enter the BIOS.
Ê Select the Advanced menu.
Ê Select the status menu of the desired component:
–CPUs: CPU Status
I This option is only available for multi-processor systems.
Memory: Memory Status
Expansion cards: PCI Status
Ê Reset replaced components to Enable.
Ê Save your changes and exit the BIOS.
I For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
5.2.10 Verifying the memory mode
If a memory module fails, the server will reboot and the defective module will be
disabled. As a result, the current operation mode (e.g. Mirrored Channel mode)
may no longer be available due to a lack of identical memory module pairs. In
this case, the operation mode will automatically revert to Independent Channel
Mode.
I For more information on memory operation modes available for your
server, see section "Modes of operation" on page 209.
After replacing the defective module(s) the memory operation mode is
automatically reset to its original state. It is recommended to verify that the
operation mode has been correctly.
Ê Enter the BIOS.
Ê Select the Advanced menu.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX1320 M4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX1320 M4 and is the answer not in the manual?

Fujitsu PRIMERGY TX1320 M4 Specifications

General IconGeneral
Bus typeDMI3
Tjunction100 °C
Scalability1S
Processor cache8 MB
Processor cores4
Processor modelE-2124
System bus rate8 GT/s
Processor socketLGA 1151 (Socket H4)
Processor codenameCoffee Lake
Execute Disable BitYes
Processor frequency3.3 GHz
Processor cache typeSmart Cache
Processor lithography14 nm
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Processor boost frequency4.3 GHz
Processor operating modes64-bit
Embedded options availableNo
PCI Express configurations1x16, 2x8, 1x8+2x4
Supported instruction setsAVX 2.0, SSE4.1, SSE4.2
Thermal Design Power (TDP)71 W
Number of processors installed1
Maximum number of PCI Express lanes16
Memory types supported by processorDDR4-SDRAM
Memory clock speeds supported by processor2666 MHz
Memory bandwidth supported by processor (max)41.6 GB/s
Maximum internal memory supported by processor128 GB
Chassis typeTower
Product colorBlack
HDD size2.5 \
HDD interfaceSerial ATA III, Serial Attached SCSI (SAS)
Optical drive typeDVD±RW
Total storage capacity0 GB
Maximum storage capacity- TB
Number of HDDs installed0
Compatible operating systemsMicrosoft Hyper-V Server 2016 Microsoft Windows Server 2016 Datacenter Microsoft Windows Server 2016 Standard Microsoft Windows Server 2016 Essentials Microsoft Windows Storage Server 2016 Standard Microsoft Hyper-V Server 2012 R2 Microsoft Windows Server 2012 R2 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2012 R2 Essentials Microsoft Windows Server 2012 R2 Foundation Microsoft Windows Storage Server 2012 R2 Standard Microsoft Hyper-V Server 2012 Microsoft Windows Server 2012 Datacenter Microsoft Windows Server 2012 Standard Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 Foundation VMware vSphere 6.5 VMware vSphere 6.0 SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Univention Corporate Server 4
Internal memory16 GB
Maximum internal memory64 GB
LAN controllerIntel i210
Cabling technology10/100/1000Base-T(X)
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports3
Power supply450 W
Operating temperature (T-T)5 - 45 °C
Operating relative humidity (H-H)10 - 85 %
PCI Express slots version3.0
PCI Express x4 (Gen 3.x) slots2
On-board graphics card modelNot available
Processor ARK ID134856
Intel Secure Key Technology version1.00
Weight and Dimensions IconWeight and Dimensions
Depth399 mm
Width98 mm
Height340 mm

Related product manuals