Fujitsu ScanSnap S510M Getting Started Guide

ScanSnap S510M Getting Started 12
Chapter 2 Connecting the ScanSnap
This chapter describes how to connect the ScanSnap to your computer.
2.1 Installing the Supplied Software
Before connecting the ScanSnap to your computer, install the following software on your computer.
(3: Supported, –: Not supported)
*1 When the operating system you are using is Mac OS X v10.4.3.
*2 When Adobe Acrobat 8 supplied with the ScanSnap is updated.
*3 When the operating system you are using is Mac OS X v10.2.8.
*4 When the operating system you are using is Mac OS X v10.3.9.
Software Mac OS X
v10.1
Mac OS X
v10.2
Mac OS X
v10.3
Mac OS X
v10.4
Mac OS X
v10.5
Adobe Acrobat
–––3*1 3*2
ABBYY
FineReader
––333
Cardiris
––3*4 33
ScanSnap
Manager
– 3*3 333
ATTENTION
• We recommend applying the latest updates to the Mac OS X for better reliability.
• Log on as a user with Administrator privileges.
• Requirements for the ScanSnap S510M are as follows:
CPU
: - PowerPC
®
G4 Processor 800MHz or higher
(recommended: PowerPC
®
G5 processor 1.6 GHz or higher)
- Intel
®
Core™ Solo or Duo Processor
(recommended: Intel
®
Core™ Duo Processor 1.83GHz or higher)
Memory
: 128MB or more
(512MB or more is recommended. When the OS is Mac OS X v10.5, 1GB or
more is recommended.)
* If the CPU and memory do not meet the recommended requirements or the USB
version 1.1 is used, the scanning speed will slow down.

Fujitsu ScanSnap S510M Specifications

General

Brand	Fujitsu
Model	ScanSnap S510M
Category	Scanner
Language	English