Chapter 5 Daily Care
51
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
The outside of the scanner, including the ADF paper chute
(feeder) and the stacker, should be cleaned with a piece of dry
cloth, a cloth moistened with Cleaner F1/mild detergent, or a
sheet of Cleaning Wipe.
5.2 Cleaning the Outside
ATTENTION
To avoid deformation and discoloration, never use paint thinner or
any other organic solvents.
Be careful not to let any moisture or water get inside the scanner
during cleaning.
It may take a long time to dry if an excessive amount of Cleaner F1/
mild detergent is used. Use it in small quantity. Wipe off the cleaner
completely to leave no residue on the cleaned parts.
Thinner
Cleaner F1
or mild detergent
Cloth
Cleaning Wipe
To Next Page
Loading...
Need help?
General