Chapter 6 Replacing the Consumables
58
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
The following table shows the consumables used for the
scanner.
Consumables need to be replaced periodically. It is
recommended that you keep a stock of new consumables for
replacement before it reaches the end of its life. The scanner
records the number of sheets scanned after replacing the
consumables, which allows you to check the status of the
consumables.
For details, refer to "8.4 Settings Related to Sheet Counters"
(page 96).
Note that the suggested replacement cycles are references for
using A4 (80 g/m
2
(20 lb) wood-free or wood-containing paper,
as these cycles vary depending on the type of documents
scanned and how often the scanner is used and cleaned.
To purchase the consumables, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner service provider.
6.1 Consumables and Replacement Cycles
Name Part No. Suggested Replacement
Cycle
ROLLER SET
Brake roller
Pick roller
PA03708-
0001
100,000 sheets or one year
HINT
Only use the specified consumables.
To Next Page
Loading...
Need help?
General