Chapter 7 Troubleshooting
73
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
Images are distorted or not clear.
Are the glass parts and rollers inside the ADF clean?
No
Clean the inside of the ADF.
For details, refer to "Chapter 5 Daily Care" (page 48).
Yes
Is the ADF being pushed down during scanning? Is there a
heavy object on top of the ADF?
Yes
Do not push down the top of the ADF or place any heavy objects on the ADF
during scanning.
No
Is anything causing the scanner to vibrate during
scanning?
Yes
Do not allow the scanner to vibrate during scanning.
No
Is the scanner placed on a flat, level surface? Are the
rubber pads attached on the bottom of the scanner?
No
Either place the scanner on a flat and level surface or attach the rubber pads on
the bottom of the scanner.
Yes
If the problem persists, check the items in "7.4 Before You Contact the Scanner
Service Provider" (page 82) first, then contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.
To Next Page
Loading...
Need help?
General