Working with the Tablet PC
Removing and installing the battery
Only use batteries approved by Fujitsu for your tablet PC.
Never use force when fitting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Never store a battery for longer periods in the discharged state. This
can make it impossible to recharge.
Removing the battery
Please observe the safet
y information in chapter "
Important notes", Page 12.
Remove the power plug fr
om the mains outlet!
► Switch off the tablet PC.
The device must not be in energy-saving mode.
► Remove all the cables from the device.
► Turn the device over and place it on a stable, flat and clean surface. If necessary, place a
slip-resistant cloth on this surface to prevent the device from being scratched.
2
1
3
► Slide the battery release in the direction of the arrow (1) and hold it in place.
► Slide the battery release in the direction of the arrow (2).
► Lift the battery out of the battery compartment (3).
Fujitsu 31
To Next Page
Loading...
Need help?
General