Working with the Tablet PC
SIM card (configuration dependent)
A SIM card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or
Tablet PC and, together with an integrated UMTS/LTE module, enables access to a mobile network.
Follow the instructions supplied by the provider of the SIM card.
The SIM card slot is located in the battery compartment and is only
accessible after the battery has been removed.
Please note that the SIM
card format must be nano-SIM (4FF). Other SIM
card formats, such as fu
ll-size (1FF), mini-SIM (2FF) or micro-SIM (3FF)
do not fit in the SIM card s
lot of your Tablet PC.
Please do not insert an
y other format of SIM card as they could
jam or could even damag
e the system.
Inserting the SIM card
► Remove the battery, see "Removing the battery", Page 31.
1
3
2
► Pull the SIM card holder out of the slot (1).
► Insert t
he SIM card (2) into the SIM card holder as shown in the diagram on the SIM card holder.
► Slide the SIM card holder with the SIM card into its slot (3).
►Instal
l the battery again, see "
Installing the battery", Page 32.
Fujitsu 35
To Next Page
Loading...
Need help?
General