Furuno DS-85 User Manual

2. MAINTENANCE
21
2.8 How to Restore Default User Settings
You can restore all default user settings as shown below. Items set by the installer (transducer
position, etc.) are not disturbed.
1. Press the MENU/ESC key to open the main menu.
2. Select [6 USER RESET], then press the ENT key. You are asked if you are sure to reset user
settings.
3. Select [YES], then press the ENT key.

Furuno DS-85 Specifications

General

Brand	Furuno
Model	DS-85
Category	Marine Equipment
Language	English