Furuno DS-85 User Manual

APPENDIX 4 ALERTS & INDICATIONS
AP-7
XDCR TEMP
Error
Transducer TEMP error. Transducer temperature is
too high.
Have a qualified tech-
nician check the set.
DIST 5V Error Distributor 5 volt error. 5 V power in the Distribu-
tor Unit is not within the
specifications.
Have a qualified tech-
nician check the set.
DIST 12V Error Distributor 12 volt error. 12 V power in the Distribu-
tor Unit is not within the
specifications.
DIST TEMP Error Distributor TEMP error. Distributor Unit tempera-
ture is too high.
IP Address Error IP Address duplication. Identical IP addresses
found.
Enter a different IP
address. (See the In-
stallation Manual.)
TVCR Fan Speed Fan speed below the limit. Fan speed in the Trans-
ceiver Unit or Distributor
Unit is too low.
Have a qualified tech-
nician check the set.
TVCR Rebooted Rebooted error with Trans-
ceiver.
Software error caused re-
booting of Transceiver
Unit.
—
DIST Rebooted Rebooted error with Dis-
tributor.
Software error caused re-
booting of Distributor Unit.
—
DISP Rebooted Rebooted error with Dis-
play.
Software error caused re-
booting of Display Unit.
—
Title Message Meaning Remedy

Furuno DS-85 Specifications

General

Brand	Furuno
Model	DS-85
Category	Marine Equipment
Language	English