Furuno DS-85 User Manual

AP-2
APPENDIX 2 PARTS LIST AND LOCA-
TION
This equipment contains complex modules in which fault diagnosis and repair down to component
level are not practicable (IMO A.694(17)/8.3.1). Only some discrete components are used. FURU-
NO ELECTRIC CO., LTD. believes identifying these components is of no use for shipborne main-
tenance; therefore, they are not listed in this manual. Major modules can be located on the parts
location photos in this appendix.
Parts list
Parts locations
Note: Units not shown to scale.
Display Unit DS-8500
Model
Unit
ELECTRICAL PARTS LIST
Blk.No.
TYPE, NAME LOCATION
PRINTED CIRCUIT BOARD
F U R U N O
DISPLAY UNIT, DISTRIBUTOR UNIT
TRANSCEIVER UNIT
DS-85
20P8200, MAIN DISPLAY UNIT DS-8500
05P0894, C-IF DISPLAY UNIT DS-8500
12P1003, FIL DISTRIBUTOR UNIT DS-8510
65P6110, DST DISTRIBUTOR UNIT DS-8510
65P6111, LIF DISTRIBUTOR UNIT DS-8510
12P1003, FIL TRANSCEIVER UNIT DS-8520
65P6120, MAIN TRANSCEIVER UNIT DS-8520
65P6121, TRX TRANSCEIVER UNIT DS-8520
Remove the C-IF board, then remove the grounding plate to expose the main board.
C-IF Board
(05P0894)
C-IF Board
(05P0894)
Grounding
plate
Grounding
plate
MAIN Board
(20P8200)

Furuno DS-85 Specifications

General

Power Supply	12-24 VDC
Power Output	600 W
Operating Temperature	-15°C to +55°C
Display Type	LCD
Frequency	200 kHz