FURUNO
FAR-21x7/28x7(-BB) SERIES
SP - 2 E3519S01R-M
3 MONITOR UNIT
3.1 Screen Raster scan, daylight bright color LCD,
yellow or green echoes in 32 levels
3.2 Display
FAR-21x7 series FAR-28x7 series
Model MU-170C MU-190 MU-201CR MU-231/231CR
Screen Size (inch) 17 19 20.1 23.1
Display area (mm) 338 x 270 376 x 301 399 x 319 470 x 353
Resolution (pixel) 1280 x 1024 1600 x 1200
Effective radar
diameter (mm)
260 290 308 340
Visible distance (mm) 920 1020 1080 1200
3.3 Minimum range 22 m
3.4 Range discrimination 26 m
3.5 Range scales and Ring interval
Range (NM) 0.125 0.25 0.5 0.75 1 1.5 2 3 4 6 8 12 16 24
Ring interval (NM) 0.025 0.05 0.1 0.25 0.25 0.25 0.5 0.5 1 1 2 2 4 4
Number of rings 5 5 5 3 6 6 6 6 4 6 4 6 4 6
32 48 72 96 120
8 8 12 16 20
4 6 6 6 6
3.6 Range accuracy 1% of the maximum range of the scale in use or 10m,
whichever is the greater
3.7 Bearing discrimination 2.1° (XN12AF), 1.5° (XN20AF), 1.2° (XN24AF), 2.0° (SN36AF)
3.8 Bearing accuracy ±1°
3.9 Presentation mode Head-up, STAB head-up, Course-up, North-up, Stern-up,
True motion (sea or ground stabilization)
3.10 Target tracking (TT) Auto or Manual acquisition: 100 targets in 0.2-24(32) NM
Tracking: 5/10 pts on all targets, Time of vector: Off/30s/1-60 min.
3.11 AIS Capacity: 1000 targets, Tracking: 10 pts on all targets
Time of vector: Off/30s/1-60 min.
3.12 Radar map 20,000 pts in radar mode, 6000 pts on IC card in chart mode
3.13 Acquisition zone 2 zones
3.14 Interswitch function Selectable from menu
4 INTERFACE
4.1 Heading signal Synchro signal (20-100VDC or 20-135VAC 50/60/400/500Hz) or
Stepper signal (20-100VDC), built-in interface (option) required,
AD-10 format or IEC61162-2
4.2 Speed log IEC61162-1
4.3 AIS IEC61162-2
4.4 Data sentences
Input ABK, ACK, ACN, ALR, BWC, BWR, DBK, DBS, DBT, DPT, DTM,
GGA, GLL, HBT, HDT, MTW, MWV, RMB, RMC, RTE, THS, VBW,
VDM, VDO, VDR, VHW, VTG, VWR, VWT, WPL, ZDA
Output ABM, ACK, ALC, ALF, ALR, ARC, BBM, EVE, HBT, OSD, RSD,
TLB, TLL, TTD, TTM, VSD
To Next Page
Loading...
