Furuno INMARSAT-C FELCOM 18 User Manual

8. OTHER FUNCTIONS
8-2
8.3 How to Select EGC Receiving Channel
EGC channel can be selected when the terminal unit is set to operate as an EGC-only
receiver. However, this procedure is shown for reference only; currently there is only
one EGC channel per NCS.
1. Press the F7 and 5 keys to display the [EGC Channel List].
2. Select a desired channel then press the Enter key.
3. Long-press the Esc key to return to the standby display.
8.4 How to Select NCS Channel
You may select NCS common channel as shown below. Currently, each satellite
sends one global beam. In the future, the satellites will transmit multiple spot beams,
namely, the NCS will have multiple channels.
1. Press the F7 and 5 keys to display the [NCS Channel List].
2. Select a desired channel then press the Enter key.
3. Long-press the Esc key to return to the standby display.
35:00.00N
135:00.00E
EGC Channel List
12580* 10840* 11088*
ENTER: Set ESC: Quit
11080*
NCS Channel List
No
AORW/AMER
FREQ
11080*
ID
044
0
0
0
0
0
0
0
01
02
03
04
05
06
07
08
ENTER: Set ESC: Quit
AORE
FREQ
12580*
ID
144
1
1
1
1
1
1
1
POR/APAC
FREQ
12580*
ID
244
2
2
2
2
2
2
2
IOR/EMEA
FREQ
10840*
ID
344
3
3
3
3
3
3
3

Furuno INMARSAT-C FELCOM 18 Specifications

General

Brand	Furuno
Model	INMARSAT-C FELCOM 18
Category	Marine Radar
Language	English