Furuno INMARSAT-C FELCOM 18 User Manual

3. SYSTEM INITIALIZATION
3-15
3.5 How to Add NCS Channels
This section shows you how to add NCS channels to the [NCS Channel List]. 19 chan-
nels can be listed per each ocean region. Currently, there are four NCS channels, and
they are marked with asterisks in the list. Add NCS channels to the list as below when
they become operational.
1. Press the F8, 8 and 4 keys to display the [NCS Channel List].
2. Use the arrow keys to put the cursor in a blank [ID] column.
3. Press the Enter key to open the data entry window.
4. Enter NCS channel ID number, in two digits (leading zero is not necessary). The
ID number range is 45-63.
5. Press the Enter key to close the window.
6. Press the → key to select the [FREQ] column then press the Enter key to open
the frequency input window.
7. Enter NCS channel frequency code. The frequency code range is 6000-14000.
8. Press the Enter key to close the window.
9. Press the Esc key to open the [Update] window.
10. [Yes] is selected; press the Enter key to register input.
Note: If the ID or frequency code entered is invalid the message "Input Error: NCS
ID" (for invalid ID) or "Input Error: Channel No." (for invalid frequency code) ap-
pears. Clear the error message by pressing the Esc key. Put the cursor at the in-
valid ID or frequency code. Then, press the Enter key and enter correct ID or
frequency code.
11. Long-press the Esc key to return to the standby display.
NCS Channel List
No
AORW/AMER
FREQ
11080*01
02
03
04
05
06
07
08
ENTER: Set ESC: Quit
AORE
FREQ
12580*
ID
144
1
1
1
1
1
1
1
POR/APAC
FREQ
12580*
ID
244
2
2
2
2
2
2
2
IOR/EMEA
FREQ
10840*
ID
344
3
3
3
3
3
3
3
ID
044
0
0
0
0
0
0
0

Furuno INMARSAT-C FELCOM 18 Specifications

General

Brand	Furuno
Model	INMARSAT-C FELCOM 18
Category	Marine Radar
Language	English