Garmin GNC 255A Pilot's Guide

190-01182-01 Rev. E Garmin GNC 255A/255B Pilot’s Guide 3-19
Functions
3.5.5 Database Info
Database Info Page
1. Press FUNC.
2. Turn the outer knob to SYS CONFIGURATION.
3. Turn the inner knob to DATABASE INFO.
4. Press ENT.
5. Press the FUNC to exit page.
3.5.6 Load Database
The GNC 255 has a USB port to allow for easily updating the system databases.
NOTE
Garmin recommends the use of a USB 2.0 compatible USB flash drive, formatted as
FAT32, for updating the database.
1. Insert the supplied cable into the USB port of the GNC 255.
2. Insert the USB flash drive into the other end of the cable.
3. Press FUNC.
4. Turn the outer knob to SYS CONFIGURATION.
5. Turn the inner knob to LOAD DATABASE.
6. Press ENT.
Database Cycle
Database Effectivity Date
USB Port
USB Cable
USB Flash Drive

Garmin GNC 255A Specifications

General

Brand	Garmin
Model	GNC 255A
Category	Transceiver
Language	English