Garmin GNC 255A Pilot's Guide

3-22 Garmin GNC 255A/255B Pilot’s Guide 190-01182-01 Rev. E
Functions
3.6.3 Viewing Timers in the COM Display
When a timer is active, the timer value will be shown in the lower right corner of the
COM display. While both timers may be actively counting at the same time, the
count down timer will have precedence in being shown. If the count down timer is
paused, the count up timer will then be shown until the count down timer is
restarted.
Timer Value Shown in the COM Display
Clearing and Stopping Displayed Timers
Clearing and Stopping Timers
1. To reset the timer, press CLR and then ENT.
2. To stop the displayed timer, press ENT twice.
When the count down timer reaches 0:00, it will continue counting as a count up
timer. The count down timer, which is counting up, will be highlighted. A count up
timer will continue counting separately.
COM Display with Count Down Timer Now Counting Up
Timer Value
Count Down Timer Value
Highlighted When Counting Up

Garmin GNC 255A Specifications

General

Brand	Garmin
Model	GNC 255A
Category	Transceiver
Language	English