Garmin GNC 255A Pilot's Guide

190-01182-01 Rev. E Garmin GNC 255A/255B Pilot’s Guide 3-21
Functions
3.6 Timers
The GNC 255 has both count up and count down timers, which may operate
simultaneously, and are shown in the lower right of the COM/NAV displays. The
countdown timer always takes precedence if it is running.
3.6.1 Setting Up the Count Down Timer
Count Down Timer Page
1. Press FUNC.
2. Turn the outer knob to TMR CONFIGURATION.
3. Turn the inner knob to COUNT DOWN.
4. Press ENT.
5. Press the inner knob to enter a starting timer value.
6. Turn the outer knob to move to set seconds, minutes, or hours.
7. Press ENT to confirm entry.
8. Press ENT to start or stop the timer.
9. Press the CLR key to reset the timer to the starting value.
10. Press the inner knob to change the starting timer value.
3.6.2 Setting Up the Count Up Timer
Count Up Timer Page
1. Press FUNC.
2. Turn the outer knob to TMR CONFIGURATION.
3. Turn the inner knob to COUNT UP.
4. Press ENT.
5. Press the ENT key to start the timer.
6. Press the ENT key again to stop the timer.
7. Press the CLR key to reset the timer to 0:00 and stop counting.
Default Start Time
Hours
Minutes
Seconds
The Default (Starting) Value

Garmin GNC 255A Specifications

General

Brand	Garmin
Model	GNC 255A
Category	Transceiver
Language	English