Garmin OREGON OREGON450 User Manual

28 Oregon Series Owner’s Manual
Customizing the Oregon
automatically based on the user
setting.
Customizing the Main
Menu
You can rearrange applications on
the Main menu.
To change the order of
applications on the Main menu:
1. Touch Setup > Main Menu.
2. Touch the application you want to
move.
3. Touch another application to
switch places.
To deactivate an application and
move it to the end of the list:
1. Touch Setup > Main Menu.
2. Touch the application.
3. Touch
.
NOTE: To reactivate an application,
select the application and select
another application to switch places.
Routing Setup
Touch Setup > Routing.
Guidance Method—select the
guidance method for calculating your
route
Off Road—calculates point-to-
point routes.
On Road For Time—calculates
on-road routes that require
minimal time to drive.
On Road For Distance—
calculates on-road routes that are
shorter in distance.
Calculate Routes for—select a
transportation method to optimize
your routes for.
Lock On Road—lock the current
location marker on the nearest road,
compensating for variances in map
position accuracy (requires routable
maps).
•
•
•

Garmin OREGON OREGON450 Specifications

General

Display Resolution	240 x 400 pixels
Battery Type	2 AA batteries (not included); NiMH or Lithium recommended
Battery Life	Up to 16 hours
Water Rating	IPX7
High-Sensitivity Receiver	Yes
Interface	USB
Built-in Memory	850 MB
Expandable Memory	microSD card (not included)
Waypoints/Favorites/Locations	1000
Routes	50
Track Log	10, 000 points, 200 saved tracks
Geocaching-Friendly	Yes (Paperless)
Custom Maps Compatible	Yes
Photo Navigation	Yes
Area Calculation	Yes
Picture Viewer	Yes
Preloaded Maps	No
Compass	Yes (tilt-compensated 3-axis)
Barometric Altimeter	Yes
Physical Dimensions	5.8 x 11.4 x 3.5 cm
Wireless Communication	ANT+
Compatibility	Garmin Connect
Display Size	3.0 inches