Garmin OREGON OREGON450 User Manual

38 Oregon Series Owner’s Manual
Appendix
MicroSD
card tray
MicroSD
card
Metal
cover
4. To remove the microSD card, lift
the metal cover and remove the
card from the microSD card tray .
5. Replace the batteries and the
battery cover.
In addition to map and data storage,
the microSD card can be used to
store les such as images, Wherigo
cartridges, geocaches, routes,
waypoints, and custom POIs.
Transferring Tracks,
Routes, or Waypoints
Tracks, routes, and waypoints
(including geocache sites) can be
transferred between your Oregon and
computer maps such as MapSource,
or maps accessed on mapping Web
sites.
To transfer tracks, routes,
or waypoints to and from
MapSource:
1. Connect the Oregon to the
computer with the USB cable.
2. Turn the Oregon on.
3. Open MapSource on your
computer.
4. Click
Receive From Device...
or Send To Device... on the
MapSource Transfer menu.
Before transferring data to or from
a Web site directly to the Oregon,
install the Garmin Communicator

Garmin OREGON OREGON450 Specifications

General

Display Resolution	240 x 400 pixels
Battery Type	2 AA batteries (not included); NiMH or Lithium recommended
Battery Life	Up to 16 hours
Water Rating	IPX7
High-Sensitivity Receiver	Yes
Interface	USB
Built-in Memory	850 MB
Expandable Memory	microSD card (not included)
Waypoints/Favorites/Locations	1000
Routes	50
Track Log	10, 000 points, 200 saved tracks
Geocaching-Friendly	Yes (Paperless)
Custom Maps Compatible	Yes
Photo Navigation	Yes
Area Calculation	Yes
Picture Viewer	Yes
Preloaded Maps	No
Compass	Yes (tilt-compensated 3-axis)
Barometric Altimeter	Yes
Physical Dimensions	5.8 x 11.4 x 3.5 cm
Wireless Communication	ANT+
Compatibility	Garmin Connect
Display Size	3.0 inches