GE 30385EE1 User Manual

25
Telephone base settings
24
Clear voicemail indicator
You can reset the VMWI (voice message waiting indicator) when the phone indicates
new messages waiting but there are none (for example, if you have previously
accessed voice mail from a dierent telephone line while away from home). When
new voice mails do exist, your telephone service provider will continue to send the
signal to activate the feature.
1. Press the Menu softkey when the handset is in idle mode.
2. Press / or use the scroll wheel to select Adv. Settings and then press the
Select softkey.
3. Press / or use the scroll wheel to select Clear VoiceMail and then press the
Select softkey.
4. Press the Yes softkey to conrm.
Reset setting
This feature allows you to restore all system settings, except the answering system
messages and phonebook, to default settings. This feature could be useful, if you have
forgotten the security code to access the answering system remotely.
1. Press the Menu softkey when the handset is in idle mode.
2. Press / or use the scroll wheel to select Adv. Settings and then press the
Select softkey.
3. Press / or use the scroll wheel to select Reset setting and then press the
Select softkey.
4. Press the Yes softkey to conrm.
NOTE: All settings under the Ans. Sys Setup, Direct Memories, Clock & Alarm, Settings, Adv. Settings and
Bluetooth menus will be restored to default settings, the redial list and call log will also be cleared.
Telephone operation
To make, answer or end a call
Using the telephone base:
To make a call
1. Lift the corded handset, or press or or .
2. Dial the phone number.
To predial a call
1. Dial the phone number using the dial pad keys. If you make an error when dialing,
press to erase the digit entered.
2. Lift the corded handset, or press or or to call.
To answer a call
Lift the corded handset, or press or to answer an incoming Line 1 call.
Lift the corded handset, or press or to answer an incoming Line 2 call.
To end a call
Return the corded handset to the telephone base or press .
Using a Bluetooth headset:
To make a call
Press on the telephone base, then dial the phone number.
-OR-
Dial the phone number, then press on the telephone base to call.
To answer a call
Press on the telephone base or press the call button on your headset to
answer an incoming call.
To end a call
Press on the telephone base or press the call button on your headset to end
a call.
To make a Line 2 call while on Line 1 call
When you are on a Line 1 call, you can initiate a Line 2 call without disconnecting the
Line 1 call.
Using the telephone base:
1. Press on the telephone base when on a Line 1 call.
2. Dial the phone number using the dial pad keys.
3. Press to call from the Line 2 line.
Press or to switch between the Line 1 call and Line 2 call.
To make a Line 1 call while on Line 2 Call
When you are on a Line 2 call, you can initiate a Line 1 call without disconnecting the
Line 2 call.

GE 30385EE1 Specifications

General

Brand	GE
Model	30385EE1
Category	Telephone
Language	English