GE 60-806-95R-16Z - Security Concord Express System Control Panel User Manual

Testing the System
49
Changing Fixed Display LCD Touchpad Chime and Trouble Beep
Tones
The frequency (pitch) of chime and trouble beep tones from a fixed display touchpad can be
adjusted to a more desirable or distinct tone, and to compensate for hearing impaired persons.
Note
For the comfort of users,
chime and trouble beep
tones revert to the quieter,
default frequency while the
keypad is in use (during or
within 15 seconds of any
button activity at that specific
touchpad).
¾ To change status tone pitch:
1. Press and hold the ‚ and 0 buttons together until you hear a steady tone, then release the
buttons.
2. Press and hold
1 to lower the pitch or press and hold 2 to raise the pitch.
3. When the desired pitch is heard, release the button.
If there is no touchpad activity for about 15 seconds, the steady tone stops sounding.
Table 5: Pager System Event Codes
Code System Event
009 Zone Restoral
111 System Disarmed
118 Trouble Condition Cleared
119 Alarm Canceled
222 System Armed to STAY
333 System Armed to AWAY
555 Phone Test
888 System Trouble Condition
999 System in Alarm
Table 6: Pager Codes
Code Sensor/Zone or User Number
000 System event not caused by a zone or user
001 - 024 Sensor/Zone Numbers 1 - 24
600 - 615 Regular User Codes 0 - 15 used
678 System Master Code used
679 Installer Code used
680 Dealer Code used
697 Quick Arm used
698 Keyswitch Sensor used
699 System Armed Itself (during service or power-up)
Table 7: System Alarm Sounds
Alarm Type Alarm Sound
Fire Repeating series of three beeps
Police/Intrusion Continuous tone
Auxiliary Rapid beeps

GE 60-806-95R-16Z - Security Concord Express System Control Panel Specifications

General

Brand	GE
Model	60-806-95R-16Z - Security Concord Express System Control Panel
Category	Security System
Language	English