GE
Direction 5370626-100, Revision 18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
4-14 Section 4-3 - General Procedure
4-3-8-2 M Mode OP Panel Controls
Table 4-5 M Mode OP Panel Controls
Step Task Expected Result(s) Comments
1
Press M Mode key M Mode Starts
2
Adjust Gain
Controls the amount of echo information
displayed in an image. Turn B Mode dial to
the left/right to increase/decrease Gain. Gain
displays on the monitor in Gn (dB).
3
Display M-Mode Cursor
Displays the M-Mode cursor on the B-Mode
image. Press Cursor and Trackball to position
M-Mode Cursor.
To Next Page
Loading...
Need help?
General
