GE
Direction 5370626-100, Revision 18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
7-10 Section 7-5 - Global Service User Interface (GSUI)
7-5-2 Active Diagnostic Function
2.) Choose Diagnostic in Global Service Interface to active diagnostic functions, choose options to
activate various functions correspondingly.
7-5-3 Control Frame
Contains the user interface elements used for:
• Diagnostic control, and
• Operator feedback
7-5-3-1 Button
This button has two modes each with appropriate text:
• Execute - to start the diagnostic, and
• Abort - to stop a diagnostic
The button can also be disabled.
7-5-3-2 Loop Count
This is an editable text field that will only accept numeric values with 4 digits or less. When the button
is configured as an “execute” button and pressed, the loop count field will be queried to determine the
number of times to execute the diagnostic.
7-5-3-3 Progress Indicator
Displays a graphical progress indication to the user.
Figure 7-8 Active Diagnostic Function
To Next Page
Loading...
Need help?
General
