GE
Direction 5370626-100, Revision 18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
8-2 Section 8-2 - Disassembly/Re-assembly of LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e
8-2-2 Handle Assy (FRU No. 313)
Purpose: This is a description on how to remove and replace the Handle Assy (FRU No.313).
8-2-2-1 Tools
• Plier
8-2-2-2 Needed Manpower
• 1 person, 2 minutes + travel
8-2-2-3 Preparations
• Shut down the system, then disconnect the AC/DC power cord and remove the battery.
8-2-2-4 Removal Procedure
Refer to Figure 8-1 on page 8-3 .
1.) Unscrew the two handle caps on both sides of the system, the rotation direction is
counterclockwise.
2.) Pull out the Handle.
8-2-2-5 Mounting procedure
1.) Install the new parts in the reverse order of removal.
To Next Page
Loading...
Need help?
General
