GE LOGIQ e R6 Series User Manual

GE
Direction 5370626-100, Revision 18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
7-30 Section 7-7 - Network and Insite II Configuration
7-7-3 Insite II Configuration (For LOGIQ e R6.x.x/R7.x.x and LOGIQ e Vet R6.x.x/R7.x.x)
(cont’d)
12.)In device side, if the device is connected to network, a mail icon will show in the status bar.
13.)Press Power button. The SYSTEM-EXIT window shows up. Click Decline, the system will not
download the software, and the Insite icon in the status bar will not shown. Click Download, the
system will begin to download the software.
NOTE: If the administrator is in remote side, press Alt+F1 to display the Frontpanel simulator. Select
the On/Off button, and the system-exit window shows up.
Figure 7-38 Status bar
Figure 7-39 System-Exit window
Figure 7-40 Frontpanel Simulator window

GE LOGIQ e R6 Series Specifications

General

Brand	GE
Model	LOGIQ e R6 Series
Category	Medical Equipment
Language	English