GE Multilin 489 User Manual

CHAPTER 4: INTERFACES
489 GENERATOR MANAGEMENT RELAY – INSTRUCTION MANUAL 4–17
Z Press the Quick Connect button.
The following window will appear:
As indicated by the window, the Quick Connect feature quickly connects the EnerVista 489
Setup software to a 489 front port with the following setpoints: 9600 baud, no parity, 8 bits,
1 stop bit.
Z Select the PC communications port connected to the relay.
Z Press the Connect button.
The EnerVista 489 Setup software will display a window indicating the status of
communications with the relay. When connected, a new Site called “Quick Connect” will
appear in the Site List window. The properties of this new site cannot be changed.
The 489 Site Device has now been configured via the Quick Connect feature for serial
communications. Proceed to Connecting to the Relay on page 4–19 to begin
communications.
4.3.3 Configuring Ethernet Communications
Z Before starting, verify that the Ethernet cable is properly connected to
the RJ-45 Ethernet port.
Courtesy of NationalSwitchgear.com

GE Multilin 489 Specifications

General

Brand	GE
Model	Multilin 489
Category	Relays
Language	English