GE NetworX NX-4 User Manual

NX-4 Control
Page 30
LOC PG DESCRIPTION DEFAULT DATA
AUXILIARY OUTPUT #1, EVENT & TIME
Segment #1: Program the event number for output #1. 0=Burglary alarm
47 19
Segment #2: Program the timing for output #1 here . 10 seconds
AUXILIARY OUTPUT #2, EVENT & TIME
Segment #1: Program the event number for output #2. 1=Fire alarm
48 19
Segment #2: Program the timing for output #2 here . 10 seconds
AUTOTEST CONTROL
Segment #1: Pro
g
ram a "1" if the interval is hours, a "0" if in
days. Add a A2" to suppress the daily test or a A3" to suppress
the hourly test.
0
Segment #2: Program the autotest interval from 1-255 days
or hours.
24
Segment #3: Pro
g
ram the autotest report in 24 hour time
format.
2
51 20
Segment #4: Pro
g
ram the autotest report time, minutes
after the hour.
0
OPENING TIME
Segment #1: Program the hour of the opening time.
8
52 21
Segment #2: Program the minutes after the hour of the
opening time.
0
CLOSING TIME / AUTO ARMING TIME
Segment #1: Pro
g
ram the hour of the closin
g
time/auto
arming time.
20
53 21
Segment #2: Pro
g
ram the minutes after hour of closin
g
/
auto arming time.
0
DAYS OF THE WEEK SYSTEM IS OPEN 54 21
1
2
3
4
Sunday
Monday
Tuesday
Wednesday
5
6
7
8
Thursday
Friday
Saturday
Reserved
DAYS OF THE WEEK "AUTO ARMING" WILL OCCUR 55 21
1
2
3
4
Sunday
Monday
Tuesday
Wednesday
5
6
7
8
Thursday
Friday
Saturday
Reserved
LOC 56 - 83 COMMUNICATOR CODES FOR SLOW SPEED FORMATS ONLY
LOC PG DESCRIPTION DEFAULT DATA
56 22 RESTORE COMMUNICATOR CODE 14 _
57 22 BYPASS COMMUNICATOR CODE 0 _
58 22 TAMPER COMMUNICATOR CODE 0 _
59 22 TROUBLE COMMUNICATOR CODE 0 _
60 22 SENSOR LOW BATTERY COMMUNICATOR CODE 0 _
61 22 SENSOR MISSING COMMUNICATOR CODE 0 _
62 22 DURESS 0-0 _ _
63 22 AUXILIARY 1 0-0 _ _

GE NetworX NX-4 Specifications

Power

operating power	16.5 VAC 25, 40, or 50 VA Transformer
auxiliary power with 25 VA transformer	12 VDC Regulated 500 mA
auxiliary power with 40 or 50 VA transformer	12 VDC Regulated 1 AMP

Operating Environment

loop resistance	300 Ohms Maximum
loop response	500mS
operating temperature	32 to 120 degrees F

Weight and Dimensions

led keypad dimensions	6.4" Wide, 4.0" High, 1.1" Deep
nx-148e lcd keypad dimensions	6.4" Wide, 5.3" High, 1.0" Deep
metal enclosure dimension	9.25" Wide, 8.25" High, 3.50" Deep