GE NetworX NX-4 User Manual

NX-4 Control
Page 31
LOC PG DESCRIPTION DEFAULT DATA
64 22
AUXILIARY 2 0-0 _ _
65 22 KEYPAD PANIC 0-2 _ _
66 22 KEYPAD MULTIPLE CODE ENTRY TAMPER 0-0 _ _
67 22 BOX TAMPER / BOX TAMPER RESTORE 0-0-0-0 _ _ _ _
68 23 AC FAIL / AC RESTORE 0-0-0-0 _ _ _ _
69 23 LOW BATTERY / LOW BATTERY RESTORE 0-0-0-0 _ _ _ _
70 23 POWER SHORT / POWER SHORT RESTORE 0-0-0-0 _ _ _ _
71 23 BELL TAMPER / BELL TAMPER RESTORE 0-0-0-0 _ _ _ _
74 23 EXPANDER TROUBLE / EXPANDER TROUBLE RESTORE 0-0-0-0 _ _ _ _
75 23 FAILURE TO COMMUNICATE 0-0 _ _
76 23 LOG FULL COMMUNICATOR CODE 0-0 _ _
77 23 OPENING CODE COMMUNICATOR CODE 11 _
78 23 CLOSING COMMUNICATOR CODE 12 _
79 23 AUTOTEST COMMUNICATOR CODE 0-0 _ _
80 23 RECENT CLOSING AND EXIT ERROR 0-0 _ _
81 24 START PROGRAMMING / END PROGRAMMING 0-0-0-0 _ _ _ _
82 24 END DOWNLOAD 0-0-0-0 _ _ _ _
83 24 CANCEL COMMUNICATOR CODE 0 _
CUSTOMIZING ZONE TYPES (GROUPS)
These locations are considered advanced programming and should only be changed with a thorough
understanding of the
operation of each bit. These locations are used to design or customize zones when the Standard Zones Types in Table 2.1
on page 25 do not fit your needs.
110 24 GROUP 1 ALARM EVENT CODE 8 _
GROUP 1 CHARACTERISTIC SELECT
Segment #1 (Circle numbers to program)
1
2
3
4
Fire (enable for fire zone)
24 Hour (enable for non-fire 24 hour
zone)
Reserved
Follower (enable for bur
g
zones that are
instant during non-entry times)
5
6
7
8
Delay 1 zone (enable to follow Timer 1 Entry/Exit
times)
Delay 2 zone (enable to follow Timer 1 Entry/Exit
times)
Interior (Enable for auto bypass or stay arming)
Local Only (enable if zone is not to be reported)
Segment #2 (Circle numbers to program)
1
2
3
4
Keypad audible on alarm.
Yelping siren on alarm.
Temporal siren on alarm.
Chime.
5
6
7
8
Bypassable.
Group Shunt.
Force Armable.
Entry Guard.
Segment #3 (Circle numbers to program)
111 24
1
2
3
4
RESERVED.
Double End of Line Tamper zone.
Trouble zone (Day zone).
Cross Zone.
5
6
7
8
Dialer Delay zone.
Swinger zone.
Restore reporting.
Listen-In.

GE NetworX NX-4 Specifications

Power

operating power	16.5 VAC 25, 40, or 50 VA Transformer
auxiliary power with 25 VA transformer	12 VDC Regulated 500 mA
auxiliary power with 40 or 50 VA transformer	12 VDC Regulated 1 AMP

Operating Environment

loop resistance	300 Ohms Maximum
loop response	500mS
operating temperature	32 to 120 degrees F

Weight and Dimensions

led keypad dimensions	6.4" Wide, 4.0" High, 1.1" Deep
nx-148e lcd keypad dimensions	6.4" Wide, 5.3" High, 1.0" Deep
metal enclosure dimension	9.25" Wide, 8.25" High, 3.50" Deep