© 2004 GE Security
All rights reserved.
Printed in the United States of America.
NetworX
™
is a trademark of the GE Security.
These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to be met
during installation, operation, and maintenance. If further information is desired or if particular problems arise that are not covered
sufficiently for the purchaser’s purpose, the matter should be referred to GE Security, Gladewater, Texas, USA.
This document contains proprietary information of GE Security, USA and is furnished to its customer solely to assist that customer in
the installation, testing, operations, and/or maintenance of the equipment described. This document shall not be reproduced in whole
or in part nor shall its contents be disclosed to any third party without the written approval of GE Security.
Please refer to the current GE Security product catalog for detailed warranty information.
Main 800-727-2339 Technical Support 800-727-2339
Outside the US 903-845-6941 Tech Support Fax 903-845-8409
Main Fax 903-845-6811 Sales & Literature 800-547-2556
Web: www.caddx.com
www.ge-security.com
SAFETY SYMBOLS
Warning
Indicates a procedure, practice, condition, or statement that, if not strictly observed,
could result in personal injury.
* This symbol indicates electrical warnings and cautions.
Caution
Indicates a procedure, practice, condition, or statement that, if not strictly observed,
could result in damage to or destruction of equipment or property.
** This symbol indicates general warnings and cautions.
Note
Indicates an essential or important procedure, instruction, condition, or statement.
Tip
Indicates a user tip. Provides helpful information that is not normally defined in
regular use, but from an experienced user.
To Next Page
Loading...
Need help?
Power
Loop Specifications
