GE Power PRO series X600 User Manual

28
In Portrait Mode, the camera is set to automatically adjust
camera exposure for realistic portrayal of skin tones.
1. Turn the Mode Dial to select Face Beautier Mode (
).
2. Press the
func
menu
button and press the up/down button to
select .
3. Press the left/right arrow button to select Face Beautier
and press the button to conrm and return to photo
shooting mode.
Beautier Mode has 3 eects:
• Eect 1: Skin Beautifying
• Eect 2: Skin Beautifying + Eye Enlarging
• Eect 3: Skin Beautifying + Eye Enlarging + Eye
Brightening
Face Beautier
Panorama Mode
With Panorama Mode, you can take a series of pictures which
will be stitched automatically into a ultra-wide panoramic
picture by the camera.
Follow the steps below:
1. Turn the Mode Dial to Panorama Mode (
) .
2. Press the arrow buttons to select a shooting direction.
(The right direction is used as default if you do not make
any choice.) 2 seconds later, the camera is ready to take
pictures. You can also press the button or half press the
shutter button to be ready to take pictures.
3. Compose your shot on the LCD screen and half press the
shutter button to focus on the subject. After focusing, fully
press the shutter button down to take the rst picture. At
this time, the process dialog of panorama mode stitching
appears on the screen.


GE Power PRO series X600 Specifications

General

Brand	GE
Model	Power PRO series X600
Category	Digital Camera
Language	English