GE Power PRO series X600 User Manual

72
Transferring les to your computer
The computer will automatically detect the camera as a
removable drive. Double-click the My Computer icon on the
desktop to locate the removable drive and to copy folders and
les in the drive to a directory on your PC as you would copy
any typical folder or le.
Follow the steps below to connect the camera to a computer.
1. Make sure both the camera and computer are turned on.
2. Connect one end of the supplied USB cable to the USB/AV
OUT port on your camera.
3. Connect the other end of the cable to an available USB
port on your computer.
Connecting to a Computer
You can use a USB cable to connect the camera and copy
(transmit) photos to a computer, printer or other device.
Setting the USB Mode
The camera’s USB port can be set to connect with either a
computer or a printer. The following steps will allow you to ensure
that the camera is correctly congured to connect with a PC.
1. Press the
func
menu
button, press the up/down arrow button to
select and press the button to enter the menu.
2. Press up/down arrow button to select
and press the
button or right arrow button to enter the menu.
3. Press the up/down arrow button to select
「USB」and press
the button or right arrow button to enter the menu.
4. Press the up/down arrow buttons to select
「PC」and
press the button to conrm.
CONNECTIONS

GE Power PRO series X600 Specifications

General

Brand	GE
Model	Power PRO series X600
Category	Digital Camera
Language	English