c d j - 7 0 0 m a n u a l • g e m i n i d j . c o m
6
To clean the CDJ-700, use only a dry soft cloth and/or com-
pressed air. If the unit is soiled with stubborn dirt, we suggest
using a 2:1 solution of distilled water and 30% isopropyl alcohol.
Avoid using harsh cleaning chemicals such as benzene, paint
thinner, bleach, or hydrochloric acid, which will damage the unit.
For optimum performance, the temperature of the operating
environment should be between +5º C to +35º C (+41º F - +95º
F). Failure to maintain proper operating temperature may result
in difficulty reading the display, thermal overload, or system-
wide instability. Avoid exposing the unit to direct sunlight.
When placing the unit in an installation, make sure that it is
placed on a stable surface, as far away from vibrations as possi-
ble. Even though the unit is impervious to vibration, the storage
devices (specifically hard drive based ones) that are designed
to be used in conjunction with it are typically not. Also be sure
not to place or use the player on heat generating sources, such
as amplifiers or near spotlights.
The CDJ-700 plays discs (CD compatible) as well as music files
on USB memory devices. All of the following file formats are
supported:
• WAV (16-bit PCM, sample rates of 8 kHz, 11.025 kHz, 12
kHz, 16 kHz, 22.50 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz)
• MP3 (16 bit, 44.1 kHz, MPEG-I, Layer III)
• AAC (16 bit, 44.1 kHz, stereo, AAC Core, AAC Plus, AAC
Plus v2)
• AIFF (16 bit, 44.1 kHz, stereo)
Supported file systems on Memory Stick Devices include:
• FAT
• FAT32
• HFS+
• NTFS
The CDJ-700 can also send MIDI data from the buttons and
dials to a computer to control the parameters and playback
controls of DJ software. The audio playback from the computer
can also be output from the CDJ-700.
Before using the CDJ-700 as an audio device, connect the
CDJ-700 with a USB cable and allow your PC/MAC to detect it.
Open your DJ software and select the CDJ-700’s output device
in the DJ software’s settings. For instructions on how to do this,
see your DJ software’s operating instructions.
The CDJ-700 is a plug and play device that requires no software
installation. The CDJ-700’s audio and MIDI drivers are compatible
with PC and MAC.
• To use the CDJ-700 with a computer using Windows, con-
nect the CDJ-700 to your PC after starting up the com-
puter. The CDJ-700 will configure standard WDM drivers.
Select the CDJ-700 as your device to use it as your audio
device. ASIO drivers can also be configured for use with
the CDJ-700, such as ASIO4ALL.
• To use the CDJ-700 with a computer using a MAC op-
erating system, connect the CDJ-700 to your MAC after
starting up the computer. Use the system’s standard CORE
Audio drivers and select the CDJ-700 as the device.
i n t r o d u c t i o n
c l e a n i n g t h e
u n i t
o p e r a t i n g
c o n d i t i o n s
p l aya b l e f o r m a t s
a n d d i s c s
u s i n g m i d i
c o n t r o l
c o n n e c t i n g t o
a
c o m p u t e r
To Next Page
Loading...
Need help?
General
Weight and Dimensions
