Gemini CDJ-700 User Manual

c d j - 7 0 0 m a n u a l • g e m i n i d j . c o m
8
p ow e r
Plug in the power cord of the CDJ-700 into the AC IN
(A).
l i n e o ut p u t
Plug one end of the included RCA cable into the LINE
OUTPUT JACK (B) on the rear panel. Plug the other end
of the RCA connectors into any available line input jacks
on your mixer. If you are connecting the CDJ-700 through
a receiver, you can plug the RCA connectors into the CD
AUX INPUT JACKS on your receiver. If there are no CD or
AUX INPUTS use any line level (not phono) inputs.
u s b o u t
Plug iin the USB cable into the USB OUT (C) on the rear
panel. Plug the other end of the USB cable into any avail-
able USB port on your computer. This will enable you to
use the CDJ-700 in MIDI mode.
d i g i ta l o u t
Plug a S/PDIF cable (not included) into the DIGITAL OUT
on the CDJ-700 (D) and into any DIGITAL IN port on any
device. This will send the digital audio to that input. Pos-
sible applications include using the DIGITAL OUT to
record or to feed to a DAW (Digital Audio Workstation)
c o n n e c t i o n s
c o n n e c t i n g t h e c d j - 70 0

Gemini CDJ-700 Specifications

General

MIDI	24 bit
Sample rate	192 kHz
Mixer section	No
Product color	Black
Frequency range	20 - 20000 Hz
Disc types supported	CD, CD-R, CD-ROM
Built-in optical drive	Yes
Audio formats supported	MP3
Signal-to-Noise Ratio (SNR)	100 dB
Number of scratcher platters	1
Display type	TFT
USB version	2.0
USB connector type	USB Type-B
Apple docking compatibility	Not supported
Input voltage	100 - 240 V
Power supply type	AC
Cables included	AC, USB

Weight and Dimensions

Depth	305 mm
Width	337 mm
Height	103.5 mm
Weight	3900 g