GIRBAU EH060 User Manual

Executing Programs 17
Code 429159
Rev. 15/0717
PROG. 36
PHAS. 1 2 3 4 5 6 7 8
16:43
Bath drainage screen
Information about:
 Drum speed during the bath drainage cycle
 Spin time
 Buzzer
(Consult the meaning of icons in sections
7.3.14...7.3.16)
4 min
i
RH-OFF
+

MODIFYING THE DURATION OF A PROGRAM
Once a program is started, the user can modify the rotation and/or spin time. This intervention will always be
possible if the time icon associated with the rotation or spin function appears.
Advancing the program and accessing in order to execute the functions on the following screen is also possible.
Intervention keys on the multi-function keyboard.
Increase the rotation or spin times
Decrease the rotation or spin times
Key for advancing to the following function screen
4.4. INFO screen
Screen that gives diverse information to the user.
This screen is accessed by pressing the key on the multi-function keyboard. This screen is
exited by pressing the key again.
Content of information:
 Weight of the load (%, kg or lb): (only for machines with LOAD DETECTION option enabled in Menu
10.2.1. General operation parameters).
 Bath level: Column of bath detected by pressure switch.
 Bath level used (%): (Only on machines with the PROPORTIONAL BATH LEVEL option activated in
Menu 10.2.1. General operation parameters). This reports the percentage of the bath level used to adapt to
the reduction in linen load. This information may vary in each phase.
 Internal temperature: Value in centigrade or Fahrenheit of the bath depending on the washing machine
configuration.
 Programmed temperature: Value in centigrade or Fahrenheit according to the washing machine
configuration.
 Unbalance: Level of unbalance detected (visible during spinning).
 Motor power (%): Level of power absorbed by the motor.
 Clock: Local time (see Section 10.3)

GIRBAU EH060 Specifications

General

Brand	GIRBAU
Model	EH060
Category	Washer
Language	English