06 Electrical Connection
User Manual V1.3-2023-01-31
30
USB Cable
For Brazil only.
6.5.2 Installing the Communication Module (optional)
Plug a communication module into the inverter to establish a connection between the inverter
and the smartphone or web pages. The communication module can be a WiFi module, or 4G
module. Set inverter parameters, check running information and fault information, and observe
system status in time via the smartphone or web pages.
NOTICE
• Refer to the delivered communication module user manual to get more introduction to the
module. For more detailed information, visit https://en.goodwe.com/.
• Remove the communication module using the unlock tool. The manufacturer shall not be
liable for the port damage if the module is removed without the unlock tool.
To Next Page
Loading...
